September 4, 2019 posted by

REF: BB_SRM_xM BeagleBoard-xM System Revision C Reference Manual BeagleBoard-xM Rev C System Reference Manual Revision April 4, BeagleBoard-xM Rev C/C1/C2 Image BeagleBoard-xM is based on the TI DM and delivers increased performance over the BeagleBoard and is based on an ARM . Bill of Materials ยท System Reference Manual. 1 Welcome to the Support Page. BeagleBone Black; BeagleBone; BeagleBoard-xM; BeagleBoard.

Author: Fenriktilar Arashile
Country: Djibouti
Language: English (Spanish)
Genre: Politics
Published (Last): 13 February 2017
Pages: 485
PDF File Size: 19.46 Mb
ePub File Size: 16.23 Mb
ISBN: 219-8-56897-875-2
Downloads: 25706
Price: Free* [*Free Regsitration Required]
Uploader: Zulkiramar

Figure 27 is the sequence in which the power rails, clocks, and reset signal come up.

There is also an option to ground the ID on the board and is discussed later in this document. There is no way for the user to generate xxm warm reset on the BeagleBoard. Figure 12 shows where the cable connected to the stereo out jack.

Page 41 – Figure Figure 10 shows the connector for the S-Video cable. A standard male to female straight DB9 cable may be used or you can use a USB to serial adapter that will plug directly into the board without the need for any other cables.


The JTAG emulator must support 1. De Wikipedia, la enciclopedia libre.

BeagleBoard Serial Cable Conne Download the HP Xk tool from one of the following locations. The client port is limited in most cases to mA by the PC.

Expansion Connector Signal Gro This interface is not amplified and may require the use of amplified speakers in certain instances.

Voltages Page – Download the SD card image you want to use listed below.

BeagleBoard – Wikipedia, la enciclopedia libre

All boards will be returned via standard mail if an issue is found. There are instances where the PC or laptop does not supply sufficient current to power the board as it does not provide the full mA. Select the decompressed image file and correct SD card location. The audio cables are not provided with the BeagleBoard-xM, but can be obtained from just about anywhere. The camera should face to the edge of the board Left when installed.

Page 46 – Figure It should also be noted that no audio will be provided over this interface. Consultado el 28 de junio de Archivado desde el original el 4 de octubre de Beagleboard Expansion Card Design Information This section provides information on what is required from a mechanical and electrical aspect to create expansion cards for the BeagleBoard that are designed to connect to the Expansion header on the BeagleBoard.

  M39016 RELAY PDF

Comments to this Manuals Your Name.

Beagleboard:Main Page

An external Audio output device, such as external stereo powered speakers, can be connected to the BeagleBoard via a 3. Where the default setting is needed, it will be indicated.

Page 19 of By setting this value in the control register, this signal will be routed to the corresponding pin of the expansion connector.

P10 Camera Signals Page – Figure S-Video Connector Page of The camera module is not supplied with the BeagleBoard. Page of The DK1-DK3 pins adjust the timing of the clock as it relates to the data beaglebpard.

Beagleboard:BeagleBoard-xM –

This cable is not supplied with the BeagleBoard. This section provides a few possible mounting scenarios for the LCD connectors.

Main Expansion Header Process